Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Remove the 3 bolts and remove the rear door window frame rear lower sub-assembly.
NOTICE:
Do not drop or damage the rear door window frame rear lower sub-assembly.
17. REMOVE REAR DOOR WINDOW GUIDE FRONT SUB-ASSEMBLY
(a) Remove the 2 bolts and remove rear door window guide front sub-assembly.
NOTICE:
Do not drop or damage the rear door window guide front sub-assembly when removing the bolts.
18. REMOVE REAR DOOR GLASS SUB-ASSEMBLY
(a) Provisionally install the power window switch.
(b) Move the rear door glass until the 2 bolts can be seen through the service holes.
(c) Remove the 2 bolts and remove the rear door glass sub-assembly.
NOTICE:
Do not damage the door glass.
19. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY
(a) Disconnect the connector.