Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Install the rear door outside handle assembly by pushing it in the direction indicated by the arrow mark shown in the illustration.
6. INSTALL REAR DOOR OUTSIDE HANDLE COVER
(a) Using "TORX" socket wrench T30, install the rear door outside handle cover with the screw.
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
7. INSTALL REAR DOOR LOCK See: Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Rear Door Lock/Installation
8. INSTALL REAR DOOR NO. 2 WEATHERSTRIP
(a) Engage the 17 clips and install the rear door No. 2 weatherstrip.
9. INSTALL REAR DOOR WEATHERSTRIP