Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2719006.png)
22. INSTALL REAR DOOR GLASS INNER WEATHERSTRIP
(a) Install the rear door glass inner weatherstrip on the rear door trim board sub-assembly and fold down the 8 claws, as shown in the illustration.
23. INSTALL REAR DOOR INSIDE HANDLE SUB-ASSEMBLY
(a) Install the rear door inside handle sub-assembly with the 3 screws.
24. INSTALL REAR DOOR INSIDE HANDLE BEZEL
(a) Install the rear door inside handle bezel with the 4 screws.
25. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
(a) Connect the rear door lock remote control cable and the rear door inside locking cable.
(b) Connect the connector.
(c) Engage the 9 clips and install the rear door trim board sub-assembly.