Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Trunk / Liftgate Shock / Support: Service and Repair
Installation
DOOR / HATCH: BACK DOOR SUPPORT: INSTALLATION
1. INSTALL BACK DOOR STAY UPPER BRACKET
(a) Apply adhesive to the threads of the 2 bolts.
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent
(b) Install the back door stay upper bracket with the 2 bolts.
Torque : 20 Nm (199 kgf-cm, 14 ft-lbf)
2. INSTALL BACK DOOR STAY LOWER BRACKET
(a) Apply adhesive to the threads of the 2 bolts.
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent
(b) Install the back door stay lower bracket with the 2 bolts.
Torque : 20 Nm (199 kgf-cm, 14 ft-lbf)
3. INSTALL BACK DOOR STAY COVER
(a) Engage the clips and install the back door stay cover.
4. INSTALL BACK DOOR SIDE STOPPER