Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Trunk / Liftgate Switch: Testing and Inspection
Power Back Door Control Switch (for Driver Side)
DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Driver Side): INSPECTION
1. INSPECT BACK DOOR CONTROL SWITCH
(a) Inspect the resistance of the switch.
Standard Resistance:
(b) If the result is not as specified, replace the back door control switch.
(c) Check the illumination operation.
(1) Connect the positive (+) battery lead to terminal 5 (ILL+) and the negative (-) battery lead to terminal 4 (ILL-), then check that the
illumination illuminates.
OK:
Illumination illuminates.