Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2813021.png)
(c) Disconnect the 2 connectors.
(d) Disengage the 3 clamps and remove the roof wire.
(e) Disconnect the connector.
(f) Disengage the clamp and remove the wire harness.
(g) Disconnect the connector.
(h) Remove the bolt.
(i) Disengage the 4 clamps and remove the amplifier antenna.
(j) Disconnect the connector.
(k) Remove the bolt and amplifier antenna.