Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Engage the 4 clips to install the No. 1 room light.
17. INSTALL ROOF CONSOLE BOX ASSEMBLY
(a) for Short Type:
Install the roof console box See: Console/Service and Repair/Removal and Replacement/Overhead Console Box/Installation.
(b) for Long Type:
Install the roof console box See: Console/Service and Repair/Removal and Replacement/Overhead Console Box/Installation.
18. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH
(a) Engage the 5 clips to install the rear window No. 2 side garnish assembly RH.
(b) Install the bolt.
Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)
(c) Engage the claw to install the cover.
19. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH (w/o Power Back Door)
HINT
Use the same procedure for both sides.