Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Power Door Lock Actuator: Testing and Inspection
Rear Door Lock
DOOR LOCK: REAR DOOR LOCK: INSPECTION
1. INSPECT REAR DOOR LOCK ASSEMBLY LH
(a) Check the door lock motor.
(1) Apply battery voltage to the door lock and check operation of the door lock.
OK:
*
If the result is not as specified, replace the door lock assembly.
(b) Check the door lock position switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
*
If the result is not as specified, replace the door lock assembly.
2. INSPECT REAR DOOR LOCK ASSEMBLY RH
(a) Check the door lock motor.
(1) Apply battery voltage to the door lock and check operation of the door lock.