Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(3) If the result is not as specified, replace the outer mirror switch.
(4) Select "R" on the left/right adjustment switch.
(5) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:
(6) If the result is not as specified, replace the outer mirror switch.
(b) Inspect the retract switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the outer mirror switch.