Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Power Mirror Switch: Service and Repair
Removal
MIRROR (EXT): OUTER MIRROR SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
6. REMOVE OUTER MIRROR SWITCH
(a) Using a screwdriver with its tip wrapped in protective tape, engage the 2 claws and remove the outer mirror switch.