Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Using a "TORX" socket wrench T30, install the roof carrier LH with the 6 screws.
Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)
14. INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY
(a) Using a "TORX" socket wrench T30, install the roof rack center support with the 4 screws.
Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)
15. INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY RH
(a) Using a "TORX" socket wrench T30, install the roof rack center support RH with the 2 screws.
Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)
16. INSTALL ROOF CARRIER SUB-ASSEMBLY RH
(a) Provisionally install the roof rack center support into the roof carrier.
(b) Using a "TORX" socket wrench T30, install the roof carrier RH with the 6 screws.