Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(e) Install the 4 springs.
(f) Attach the 2 wire harness clamps and connect the connector.
2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/o Climate Control Seat System)
(a) Attach the 3 claws to install the bush.
(b) Install the lumbar support adjuster with the 2 screws.
(c) Connect the lumbar support adjuster connector.
(d) Attach the 6 hooks to install the seatback spring.
3. INSTALL SEATBACK COVER WITH PAD See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly
4. INSTALL FRONT SEAT HEADREST SUPPORT See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly
5. INSTALL FRONT SEAT CUSHION SHIELD INNER LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Reassembly