toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Power Seat Switch (for Front Seat)|Page 9463 > < Power Seat Switch (for Front Seat)|Page 9461

Sequoia 4WD V8-4.6L (1UR-FE) (2010)

Page 2
background image

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(b) If the result is not as specified, replace the switch.

(c) Apply battery voltage to the switch connector, and check that the fold seat switch assembly illuminates.

OK:

(d) If the result is not as specified, replace the switch.

3. INSPECT FOLD SEAT SWITCH ASSEMBLY (for LH Side)

Power Seat Switch (for Front Seat)|Page 9463 > < Power Seat Switch (for Front Seat)|Page 9461