Sequoia 4WD V8-4.6L (1UR-FE) (2010)
2. REMOVE DOOR CONTROL SWITCH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door control switch.
Installation
DOOR LOCK: DOOR CONTROL SWITCH: INSTALLATION
1. INSTALL DOOR CONTROL SWITCH
(a) Engage the 2 claws and install the door control switch.
2. INSTALL FRONT ARMREST UPPER BASE PANEL LH See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly