Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Power Mirror Switch: Testing and Inspection
MIRROR (EXT): OUTER MIRROR SWITCH: INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)
(a) Check the resistance.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(3) If the result is not as specified, replace the outer mirror switch.
(4) Select "R" on the left/right adjustment switch.
(5) Measure the resistance according to the value(s) in the table below.
Standard Resistance: