Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2991003.png)
9. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment LH Seat)
(a) Detach the 2 claws and remove the fold seat switch assembly.
Installation
SEAT: POWER SEAT SWITCH (for Rear No. 2 Seat): INSTALLATION
1. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment RH Seat)
(a) Attach the 2 claws to install the fold seat switch assembly.
2. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment LH Seat)
(a) Attach the 2 claws to install the fold seat switch assembly.
3. INSTALL QUARTER TRIM REAR COVER LH (for Luggage Compartment)
(a) Attach the 3 claws and guide to install the quarter trim rear cover LH.