Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-3011002.png)
(a) Remove the integration control and panel assembly See: Heating and Air Conditioning/Control Assembly/Service and Repair/Air
Conditioning Panel/Removal.
2. REMOVE SEAT HEATER SWITCH (w/ Climate Control Seat System)
(a) Disengage the 4 claws and remove the seat heater switch.
3. REMOVE SEAT HEATER SWITCH (w/o Climate Control Seat System)
(a) Disengage the 2 claws and remove the seat heater switch.
Installation
SEAT: SEAT HEATER SWITCH (for Front Seat): INSTALLATION
1. INSTALL SEAT HEATER SWITCH (w/ Climate Control Seat System)
(a) Engage the 4 claws to install the seat heater switch.
2. INSTALL SEAT HEATER SWITCH