Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-3035002.png)
2. REMOVE BACK DOOR CONTROL SWITCH
(a) Disengage the 2 claws and remove the back door control switch.
(b) Disconnect the connector.
Installation
DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Driver Side): INSTALLATION
1. INSTALL BACK DOOR CONTROL SWITCH
(a) Connect the connector.
(b) Engage the 2 claws and install the back door control switch.
2. INSTALL NO. 1 SWITCH HOLE BASE See: Power Back Door Main Switch/Installation