Sequoia 4WD V8-4.6L (1UR-FE) (2010)
HINT
*
*1: FR RH
*
*2: FR LH
*
*3: RR RH
*
*4: RR LH
*
*5: FR Master Cylinder
*
*6: RR Master Cylinder
(b) Using a union nut wrench, disconnect the 2 brake tubes from the VSC actuator.
(c) Using a union nut wrench, remove the 2 brake tubes from the brake master cylinder.
3. DISCONNECT BRAKE TUBE
(a) Using a union nut wrench, disconnect the 4 brake tubes from the VSC actuator.
(b) Remove the clamp from the VSC actuator bracket.
4. REMOVE VSC ACTUATOR WITH ACTUATOR BRACKET ASSEMBLY
(a) Remove the 3 nuts and VSC actuator with actuator bracket.
NOTICE:
Do not damage the brake lines or wire harness.