Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1721002.png)
(d) Remove the bolt and disconnect the flexible hose bracket.
(e) Remove the 2 bolts and flexible hose.
Installation
BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: INSTALLATION
1. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE
(a) Install the flexible hose with the 2 bolts.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
(b) Connect the flexible hose bracket with the bolt.
Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
(c) Install the flexible hose and a new gasket to the disc brake cylinder with a new union bolt.
Torque : 30 Nm (306 kgf-cm, 22 ft-lbf)