Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Brake Master Cylinder: Overhaul
Disassembly
BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: DISASSEMBLY
1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a) Using a T25 "TORX" socket wrench, remove the screw and reservoir.
2. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 grommets.
Reassembly
BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: REASSEMBLY
1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a) Apply a light coat of lithium soap base glycol grease to the 2 new grommets and install them onto the master cylinder body.
2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a) Install the master cylinder reservoir onto the master cylinder body.
(b) Using a T25 "TORX" socket wrench, install the screw.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)