Sequoia 4WD V8-4.6L (1UR-FE) (2010)
NOTICE:
Adjustment values are calculated and then stored in the laser sensor. Because the system is not controlled mechanically, the same
value as before is displayed to adjust the beam axis.
(d) Mechanical adjustment method.
(1) Adjust the direction of the radar with adjustment bolts A and B until the values are within the auto axis adjustment range. Move the
reflector from the default position as necessary (Upper/Lower, Right/Left) to find the reflector position where the current angle can be read
using the Techstream. Adjust the direction of the reflector in the inverse of the direction moved by adjustment bolts A and B until the
values are within the standard value ranges.
Adjustment: