Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Drive Belt: Service and Repair
Removal
1UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
2. REMOVE NO. 1 ENGINE UNDER COVER See: Engine Lubrication/Engine Oil/Service and Repair/Replacement
3. REMOVE FAN AND GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then
insert a bar of dia 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
HINT
The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the V belt.