Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Remove the oil filter drain plug.
(c) Install the pipe to the oil filter cap.
HINT
Use a container to catch the draining oil.
NOTICE:
If the O-ring is removed with the drain plug, install the O-ring together with the pipe.
(d) Check that oil is drained from the oil filter. Then disconnect the pipe and remove the O-ring, as shown in the illustration.
(e) Using SST, remove the oil filter cap.
SST : 09228-06501
NOTICE:
Do not remove the oil filter bracket clip.