Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-826005.png)
(a) Apply a light coat of engine oil to 2 new O-rings.
(b) Install the 2 O-rings to the oil cooler.
(c) Install the oil cooler with the 5 nuts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
3. INSTALL OIL FILTER BRACKET
(a) Apply a light coat of engine oil to 2 new O-rings.
(b) Install the 2 O-rings to the timing chain cover.
(c) Install the oil filter bracket with the 2 nuts and 2 bolts.
Torque : 35 Nm (357 kgf-cm, 26 ft-lbf)
4. INSTALL NO. 1 OIL COOLER BRACKET