Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-842004.png)
(b) Remove the bolt and purge VSV.
14. REMOVE UNION TO CONNECTOR TUBE HOSE ASSEMBLY
(a) Remove the 2 bolts and detach the hose clamp.
(b) Remove the union to connector tube hose from the intake manifold.
(c) Remove the 2 bolts and 2 wire harness brackets.
15. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR See: Powertrain Management/Computers and Control Systems/Manifold
Pressure/Vacuum Sensor/Service and Repair/Removal
16. REMOVE THROTTLE BODY ASSEMBLY
(a) Remove the 4 bolts, throttle body and gasket.