Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-881002.png)
(4) Remove the 2 bolts and disconnect the water by-pass pipe.
(5) Remove the 4 bolts and 4 ignition coils.
4. REMOVE SPARK PLUG
(a) Using a 16 mm plug wrench, remove the 8 spark plugs.
(4) Remove the 2 bolts and disconnect the water by-pass pipe.
(5) Remove the 4 bolts and 4 ignition coils.
4. REMOVE SPARK PLUG
(a) Using a 16 mm plug wrench, remove the 8 spark plugs.