Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2294001.png)
Cabin Temperature Sensor / Switch: Service and Repair
Room Temperature Sensor (for Front Side)
Components
HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Front Side): COMPONENTS
Removal
HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Front Side): REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
4. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
7. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)
(a) Disconnect the connector, hose and remove the room temperature sensor.