Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2307002.png)
Reassembly
HEATING / AIR CONDITIONING: CONDENSER (w/o Air Cooled Transmission Oil Cooler): REASSEMBLY
1. INSTALL COOLER DRYER
(a) Using pliers, install the cooler dryer onto the modulator.
(b) Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
Compressor oil:
ND-OIL 8 or equivalent
(c) Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.
Torque : 2.9 Nm (30 kgf-cm, 26 in-lbf)
2. INSTALL NO. 2 COOLER CONDENSER CUSHION
(a) Install the 2 cushions to the cooler condenser.