Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Installation
HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
1. INSTALL EVAPORATOR TEMPERATURE SENSOR
NOTICE:
If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.
(a) Insert the sensor to a location that is 1 fin to the right or left of its previous location.
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Install the evaporator to the blower case.
3. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY
(a) Attach the 3 claws and install the air conditioning radiator.