Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Disconnect the cooler refrigerant liquid pipe.
(b) Remove the O-ring from the cooler refrigerant liquid pipe.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
10. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE LUGGAGE COMPARTMENT TRIM BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
14. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
15. REMOVE DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
16. REMOVE SEAT TRACK BRACKET FRONT COVER OUTER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear No. 2 Seat Assembly (for Manual Seat Type RH Side)/Removal
17. REMOVE SEAT TRACK BRACKET FRONT COVER INNER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear No. 2 Seat Assembly (for Manual Seat Type RH Side)/Removal
18. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear No. 2 Seat Assembly (for Power Seat Type RH Side)/Removal
19. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear No. 2 Seat Assembly (for Manual Seat Type RH Side)/Removal
20. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
21. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
22. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
23. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
24. SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
25. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
26. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
27. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Standard) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
28. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
29. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
30. REMOVE REAR SIDE NO. 2 AIR DUCT
(a) Remove the 2 clips and the air duct.