toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 7449 > < Removal and Replacement|Page 7447
Page 31
background image

Telescopic Steering Column)/Installation

14. INSTALL STEERING INTERMEDIATE SHAFT ASSEMBLY

(a) Align the matchmarks on the steering column and install the steering intermediate shaft.

(b) Install the bolt.

Torque : 35 Nm (357 kgf-cm, 26 ft-lbf)

15. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY   See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and

Replacement/Steering Column Assembly (for Manual Tilt and Manual Telescopic Steering Column)/Installation

16. INSTALL REAR NO. 4 AIR DUCT

(a) Attach the 4 claws and install the air duct.

(b) Install the clip.

17. INSTALL REAR NO. 3 AIR DUCT

(a) Attach the 4 claws and install the air duct.

(b) Install the clip.

18. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY (for 14 Speakers)   See: Accessories and Optional Equipment/Radio, Stereo, and

Compact Disc/Amplifier/Service and Repair/Installation

19. INSTALL AUDIO AMPLIFIER COVER (for 14 Speakers)   See: Accessories and Optional Equipment/Radio, Stereo, and Compact

Disc/Amplifier/Service and Repair/Installation

20. INSTALL FRONT RH SEAT ASSEMBLY (for RH Side)   See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat

Assembly (for Power Seat)/Installation

21. INSTALL SEAT TRACK OUTER COVER RH (for RH Side)   See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front

Seat Assembly (for Power Seat)/Installation

Removal and Replacement|Page 7449 > < Removal and Replacement|Page 7447