Sequoia 4WD V8-4.6L (1UR-FE) (2010)
69. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
70. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
71. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
72. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
73. INSTALL FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
74. INSTALL FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
75. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
76. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
77. CONNECT HEATER WATER OUTLET HOSE A
(a) Connect the water hose onto the air conditioning unit.
NOTICE:
Perform the installation with the hose clip and mark at the correct angle.
78. CONNECT HEATER WATER INLET HOSE A
(a) Connect the water hose onto the air conditioning unit.
NOTICE:
Perform the installation with the hose clip and mark at the correct angle.
79. CONNECT COOLER REFRIGERANT LIQUID PIPE B