Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2330009.png)
(a) Install the damper servo with the 3 screws, as shown in the illustration.
(b) Connect the connector.
7. INSTALL BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
8. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
9. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the damper servo.