Sequoia 4WD V8-4.6L (1UR-FE) (2010)
5. REMOVE HEATER WATER INLET HOSE
(a) Using pliers, grip the claws of the clip and slide the clips to disconnect the heater water hose.
6. REMOVE HEATER WATER OUTLET HOSE
(a) Using pliers, grip the claws of the clip and slide the clips to disconnect the heater water hose.
7. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Remove the screw.
(b) Detach the claw and remove the heater clamp.
(c) Remove the heater radiator unit from the rear cooling unit as shown in the illustration.
8. REMOVE REAR BLOWER MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and the rear blower motor.
9. REMOVE BLOWER MOTOR CONTROL
(a) Remove the 2 screws and the blower motor controller.