Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2330017.png)
(b) Detach the claw and the rear evaporator temperature sensor.
12. REMOVE REAR EVAPORATOR SUB-ASSEMBLY
(a) Remove the 13 screws.
(b) Remove the rear evaporator as shown in the illustration.
(c) Remove the 2 O-rings from the rear evaporator.
Reassembly
HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REASSEMBLY
1. INSTALL REAR EVAPORATOR SUB-ASSEMBLY
(a) Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces.