Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2330022.png)
11. INSTALL REAR MODE DAMPER SERVO MOTOR SUB-ASSEMBLY
(a) Using the reference point, install the rear mode damper servo motor with the 2 screws.
(b) Connect the connector.
(c) Install the bracket with the 4 screws.
12. INSTALL REAR AIR MIX DAMPER SERVO MOTOR SUB-ASSEMBLY
(a) Using the reference point, install the rear air mix control servo motor with the 2 screws.
(b) Connect the connector.