Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Evaporator Temperature Sensor / Switch: Testing and Inspection
Rear Evaporator Temperature Sensor
HEATING / AIR CONDITIONING: REAR EVAPORATOR TEMPERATURE SENSOR: INSPECTION
1. INSPECT REAR EVAPORATOR TEMPERATURE SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NOTICE:
*
Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.
*
When measuring the sensor temperature must be the same as the ambient temperature.
HINT
As the temperature increases, the resistance decreases (see the graph).