Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2371001.png)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. REMOVE AIR CONDITIONER PRESSURE SENSOR
(a) Disconnect the connector.
(b) Using a deep socket wrench 27 mm, remove the pressure sensor.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.