Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Clock: Initial Inspection and Diagnostic Overview
METER / GAUGE / DISPLAY: CLOCK SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT
Use these procedures to troubleshoot the clock system.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
3. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table See: Symptom Related Diagnostic Procedures.
B -- Go to step 5
A -- Continue to next step.
4. OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Terminals of ECU See: Testing and Inspection/Pinout Values and Diagnostic Parameters/Meter / Gauge System.
NEXT -- Continue to next step.
5. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
6. CONFIRMATION TEST
NEXT -- END