Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Seat Belt Arming and Disarming: Service and Repair
HINT
*
Use the same procedure for the LH side and RH side.
*
The procedure listed below is for the LH side.
1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
*
After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory
and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the
negative (-) battery terminal.
*
When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.