Sequoia 4WD V8-4.6L (1UR-FE) (2010)
*
The procedure described below is for the LH side.
1. REMOVE COURTESY LIGHT SWITCH
(a) Disconnect the connector.
(b) Using "TORX" socket wrench T30, remove the screw and the courtesy light switch.
Installation
LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL COURTESY LIGHT SWITCH
(a) Using "TORX" socket wrench T30, install the courtesy light switch with the screw.
Torque : 3.7 Nm (38 kgf-cm, 33 in-lbf)