Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Tire Pressure Module: Service and Repair
Removal
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE INSTRUMENT SIDE PANEL RH See: Dashboard / Instrument Panel/Service and Repair/Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH See: Dashboard / Instrument Panel/Service and
Repair/Removal
6. REMOVE TIRE PRESSURE WARNING ECU
(a) Disconnect the tire pressure warning ECU connector.
(b) Remove the 2 nuts and the tire pressure warning ECU.