Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-3195002.png)
(b) Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 6 screws.
(c) Disconnect the connector and then remove the roof console box.
Installation
LIGHTING (INT): PERSONAL LIGHT (for Long Type Overhead Console Box): INSTALLATION
1. INSTALL ROOF CONSOLE BOX ASSEMBLY
(a) Connect the connector.
(b) Engage the 2 guides and using a "TORX" socket wrench T20, install the roof console box with the 6 screws.
(c) Engage the 4 claws and install the cover.
Components
LIGHTING (INT): PERSONAL LIGHT (for Short Type Overhead Console Box): COMPONENTS