Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Hazard Warning Flasher: Service and Repair
Installation
LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSTALLATION
1. INSTALL TURN SIGNAL FLASHER ASSEMBLY
(a) Install the turn signal flasher with the nut.
(b) Connect the connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Installation
3. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
4. INSTALL COWL SIDE TRIM BOARD LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
5. INSTALL FRONT DOOR SCUFF PLATE LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.