Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Installation
LIGHTING (INT): ROOM LIGHT SWITCH: INSTALLATION
1. INSTALL INTERIOR DOME LIGHT SWITCH ASSEMBLY
(a) Engage the 2 claws and install the interior dome light switch.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation.
5. INSTALL COWL SIDE TRIM BOARD LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.
6. INSTALL FRONT DOOR SCUFF PLATE LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation.