Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
(c) Engage the clamp.
2. INSTALL W/MOTOR BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
(a) Install the back door lock with the 4 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
(c) Engage the clamp.
3. INSTALL BACK DOOR LOCK PROTECTOR SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
4. INSTALL BACK DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
6. INSTALL BACK DOOR PULL STRAP See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
7. INSTALL BACK DOOR STRAP COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
8. INSTALL BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
9. INSTALL BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
10. INSTALL BACK DOOR CENTER GARNISH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly