Sequoia 4WD V8-4.6L (1UR-FE) (2010)
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (for Center Console Side): REMOVAL
1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Front Console Box/Removal
2. REMOVE CONSOLE BOX BEZEL
(a) Disengage the claw and remove the console box bezel.
(b) Disconnect the connector.
3. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power outlet socket assembly.
4. REMOVE POWER OUTLET SOCKET COVER
(a) Disengage the 2 claw and remove the power outlet socket cover.
Installation
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (for Center Console Side): INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
(a) Engage the 2 claw and install the power outlet socket cover.