Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1112015.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result
C -- CONNECT CONNECTOR
B -- CONNECT CONNECTOR
A -- REPLACE NO. 1 JUNCTION CONNECTOR
5. CONNECT CONNECTOR
(a) Reconnect the H101 No. 1 junction connector.
NEXT -- Continue to next step.
6. CHECK FOR OPEN IN CAN BUS MAIN WIRE (NO. 2 JUNCTION CONNECTOR - ECM)
(a) Disconnect the H116 No. 2 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
