Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRES (COMBINATION METER ECU)
OK -- REPAIR OR REPLACE NO. 4 JUNCTION CONNECTOR
19. CHECK FOR SHORT IN CAN BUS WIRES (NO. 1 JUNCTION CONNECTOR - NO. 4 JUNCTION CONNECTOR)
(a) Disconnect the H91 No. 1 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 1 JUNCTION CONNECTOR - NO. 4 JUNCTION
CONNECTOR)
OK -- Continue to next step.
20. CHECK FOR SHORT IN CAN BUS WIRES (NO. 1 JUNCTION CONNECTOR - COMBINATION METER ECU)
NOTICE:
For vehicles with air suspension system. go to "Check for Short in CAN Bus Wires (No. 1 Junction Connector - Power Steering
ECU)".
(a) Disconnect the H91 No. 1 junction connector.